User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Introduction<br />
1.1 The <strong>TNC</strong> <strong>360</strong><br />
The Operating Panel<br />
The keys on the <strong>TNC</strong> operating panel are grouped according to their<br />
functions:<br />
• External data transfer<br />
• Probing functions<br />
• Editing functions<br />
• Jump instruction GOTO<br />
• Arrow keys<br />
• Address letters<br />
• NO ENT key<br />
• Tool-related address letters<br />
Graphic operating<br />
modes<br />
• Program selection<br />
• Address letters<br />
50<br />
PGM<br />
NR<br />
CR<br />
EXT<br />
GOTO<br />
STOP<br />
NO<br />
ENT<br />
MOD<br />
100<br />
0<br />
CL<br />
PGM<br />
RND<br />
TOUCH<br />
PROBE<br />
CYCL<br />
DEF<br />
TOOL<br />
DEF<br />
BLK<br />
FORM<br />
150<br />
F %<br />
PGM<br />
CALL<br />
CT<br />
DEL<br />
CYCL<br />
CALL<br />
TOOL<br />
CALL<br />
GRAPHICS<br />
CC<br />
MAGN START<br />
50<br />
LBL<br />
SET<br />
R- L<br />
Override controls<br />
for spindle speed<br />
and feed rate<br />
100<br />
0<br />
L<br />
C<br />
ENT<br />
LBL<br />
CALL<br />
R + R<br />
7 8 9<br />
4 5 6<br />
1 2 3<br />
<strong>TNC</strong> <strong>360</strong> 1-3<br />
150<br />
S %<br />
X<br />
Y<br />
Z<br />
IV<br />
CE<br />
0<br />
Q<br />
MOD<br />
.<br />
Q<br />
DEF<br />
P<br />
HEIDENHAIN<br />
+/<br />
END<br />
The functions of the individual keys are described<br />
on the inside front cover. An overview<br />
of the address letters used for <strong>ISO</strong> programming<br />
is provided in Chapter 11.<br />
The machine operating buttons, such as for NC start, are described in the manual for your machine tool.<br />
In this manual they are shown in gray.<br />
The Screen<br />
I<br />
Header<br />
The header of the screen shows the selected operating mode. Dialog<br />
questions and <strong>TNC</strong> messages also appear there.<br />
• Numerical entries<br />
• Axis selection<br />
Operating modes<br />
Brightness control<br />
(BE 212 only)
Change language