User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Introduction<br />
1.5 Programs<br />
Selecting, erasing and protecting programs<br />
1-20<br />
To select a program:<br />
e.g.<br />
PGM<br />
NR<br />
PROGRAM NUMBER ?<br />
1<br />
or<br />
ENT<br />
To erase a program:<br />
ENT<br />
CL<br />
PGM<br />
or<br />
or<br />
PGM<br />
NR<br />
5<br />
ERASE = ENT / END = NO ENT<br />
To protect a program:<br />
G 5<br />
5 ENT<br />
0<br />
NO<br />
ENT<br />
PROGRAM NUMBER = ?<br />
END<br />
Resulting NC block: %5 G71 G50 *<br />
Removing edit protection<br />
Call the program management.<br />
Use the arrow keys to highlight the program.<br />
Enter the desired program number, for example 15.<br />
Confirm your selection.<br />
Press CL PGM to call the program management.<br />
Use the arrow keys to highlight the program.<br />
Erase the program or abort.<br />
Call the program management.<br />
Enter the number of the program to be protected, for example<br />
program number 5.<br />
Use the arrow key to highlight the first block.<br />
To remove edit protection re-select the program and enter the code<br />
number 86357 with the corresponding MOD function (see page 10-3).<br />
Enter the function for program protection, conclude the block.<br />
<strong>TNC</strong> <strong>360</strong>
Change language