User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain

4 Programming
4.1 Editing Part Programs
Editing functions
TNC 360
Editing means entering, adding to or changing commands and information
for the TNC.
The TNC enables you to
• Enter data with the keyboard
• Select desired blocks and words
• Insert and erase blocks and words
• Correct erroneously entered values and commands
• Easily clear TNC messages from the screen
Types of input
Numbers, coordinate axes and radius compensation are entered directly
by keyboard. You can set the algebraic sign either before, during or after a
numerical entry.
Selecting blocks and words
• To call a block with a certain block number:
GOTO
e.g.
1
or
or
or
or
or
0
N e.g. 3 5
ENT
GOTO
ENT
• To move one block forward or backward:
• To select individual words in a block:
• To find the same word in other blocks:
Block number 10 is highlighted.
Press the vertical arrow keys.
Press the horizontal arrow keys.
Select the word in the block.
Jump to the same word in other blocks.
Inserting blocks
Additional program blocks can be inserted behind any existing block
(except the N9999 block).
Select the block in front of the desired insertion.
Program the new block.
4-3