User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain

G
8
The TNC beginner can use the manual as a workbook. The first part of
the manual deals with the basics of NC technology and describes the
TNC functions. It then introduces the techniques of conversational
programming. Each new function is thoroughly described when it is first
introduced, and the numerous examples can be tried out directly on the
TNC. The TNC beginner should work through this manual from beginning
to end to ensure that he is capable of fully exploiting the features of this
powerful tool.
For the TNC expert, this manual serves as a comprehensive reference
work. The table of contents and cross references enable him to quickly
find the topics and information he needs. Easy-to-read dialog flowcharts
show him how to enter the required data for each function.
The dialog flow charts consist of sequentially arranged instruction boxes.
Each key is illustrated next to an explanation of its function to aid the
beginner when he is performing the operation for the first time. The
experienced user can use the key sequences illustrated in the left part of
the flowchart as a quick overview. The TNC dialogs in the instruction
boxes are always presented on a gray background.
Layout of the dialog flowcharts
Dialog initiation keys
3
DIALOG PROMPT (ON TNC SCREEN)
e.g.
8 3
Answer the prompt with
these keys
Press this key
+/
Or press this key
.
.
.
ENT
NEXT DIALOG QUESTION
The functions of the keys are explained here.
Function of the key.
Function of an alternative key.
The trail of dots indicates that:
• the dialog is not fully shown, or
• the dialog continues on the next page.
A dashed line means that either
the key above or below it can be
pressed.
TNC 360