User's Manual ISO TNC 360 (260020xx, 280490xx) - heidenhain

2 Manual Operation and Setup
2.2 Spindle Speed S, Feed Rate F and Miscellaneous Function M
To enter the miscellaneous function M
2-6
N10 M
50
50
M
e.g. 6 ENT
I
100
0
100
0
150
S %
150
F %
Select the M function key.
Chapter 11 provides an overview of the miscellaneous functions.
To change the spindle speed S
Enter the desired miscellaneous function M, for example M6.
Activate the miscellaneous function M with the machine START button.
Turn the spindle speed override knob:
Adjust the spindle speed S to between 0% and 150% of the last entered
value.
The spindle speed override will function only if your machine tool is equipped with a stepless spindle drive.
To change the feed rate F
In the MANUAL OPERATION mode the feed rate is set through a machine
parameter.
Turn the feed rate override knob:
Adjust the feed rate to between 0% and 150% of the last entered value.
TNC 360