Volume-II - GAIL

ANNEXURE-III (NEW)
INFORMATION TO BE FURNISHED AT THE TIME OF BIDDING
The following information as applicable shall be furnished at Bid stage with respect to line pipe to be
supplied.
(i) Name(s) of proposed Manufacturer(s)
(ii) Authorization letter(s) from Manufacturer(s) where applicable.
(iii) Authorization letter(s) from Manufacturer(s) of skelp / plates, in case skelp manufacturing
facility is not an integral part of the Supplier's pipe mill.
(iv) Record of similar supplies made earlier by the Manufacturer for both skelps and pipes,
giving complete details of diameter, thickness, length, grade of plate/ pipe, service, year,
name of project, name of client, and contact person.
In particular, details of similar supplies made over the last five years shall be furnished.
(i) Descriptive technical catalog (s) of the proposed Manufacturer (s) clearly indicating the mill
capacity, existing range of production, facilities at pipe mill, etc.
(ii) Pipe manufacturing facilities/ equipment details viz.
(iii) Welding system having integrated control as per Cl. 5.1
(iv) Heat treatment facilities as per Cl. 5.1
(v) Automatic ultrasonic testing for skelp, pipe body and weld as per Cl. 9.8.5.
(vi) Copy of valid certificate of Authority to use API monogram as per clause 1.2 of this
specification.
(vii) A clause wise list of technical deviations, if considered unavoidable, from the requirements
of this specification shall be furnished in the proforma enclosed with the Enquiry.
Deviations indicated anywhere else in the offer shall not be considered valid. In case of no
deviations, Bidder shall write "NO DEVIATIONS" in the said proforma.
GAIL (INDIA) LIMITED CARBON STEEL LINE PIPES GAIL-TS-LINEPIPE-CS
Page 32 of 37