HP LaserJet 5200 user guide - ENWW
HP LaserJet 5200 user guide - ENWW
HP LaserJet 5200 user guide - ENWW
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Control panel message Description Recommended action<br />
Clearing paper path<br />
CLOSE TOP COVER AND FRONT DOOR<br />
CODE CRC ERROR<br />
Creating...CLEANING PAGE<br />
DATA RECEIVED<br />
alternates with<br />
Ready<br />
Event Log Empty<br />
Genuine <strong>HP</strong> supplies installed<br />
GENUINE <strong>HP</strong> SUPPLIES DESIGNED FOR<br />
<br />
alternates with<br />
Ready<br />
The printer jammed or detected misplaced<br />
media. The printer is attempting to eject<br />
these pages automatically.<br />
The top cover and front door need to be<br />
closed.<br />
An error has occurred during a firmware<br />
upgrade.<br />
The printer is generating a cleaning page.<br />
The printer returns to the Ready state after<br />
the cleaning page is printed.<br />
The printer received data and is waiting for<br />
a form feed. When the printer receives<br />
another file, the message disappears.<br />
The printer is paused.<br />
SHOW EVENT LOG was selected from the<br />
control panel, and the event log is empty.<br />
A new <strong>HP</strong> cartridge has been installed. The<br />
printer returns to the Ready state after<br />
approximately 10 seconds.<br />
This genuine <strong>HP</strong> supply was not designed<br />
for this printer and is not supported. The<br />
printer can print with this supply, but print<br />
quality might be affected.<br />
No action necessary.<br />
Close the top cover and front door.<br />
1. Reinstall the firmware.<br />
2. If the problem persists, contact<br />
<strong>HP</strong> Support.<br />
1. Load the cleaning page into tray 1.<br />
2. Press Menu.<br />
3. Select PRINT QUALITY, and then<br />
press .<br />
4. Select PROCESS CLEANING PAGE,<br />
and then press .<br />
If the printer is waiting for a form feed,<br />
press to continue.<br />
If the printer is paused, press Stop to<br />
continue.<br />
No action necessary.<br />
No action necessary.<br />
Replace this supply with a genuine<br />
<strong>HP</strong> supply that is designed for this printer.<br />
Incorrect The PIN number is incorrect. Contact the network administrator.<br />
INFLATE FAILURE<br />
Initializing<br />
Initializing permanent storage<br />
INSERT OR CLOSE TRAY XX<br />
An error has occurred during a firmware<br />
upgrade.<br />
This message appears when the printer is<br />
turned on and begins initialization.<br />
This message appears when the printer is<br />
turned on to show that permanent storage<br />
is being initialized.<br />
A tray is open and the printer is trying to<br />
print from another tray.<br />
1. Reinstall the firmware.<br />
2. If the problem persists, contact<br />
<strong>HP</strong> Support.<br />
No action necessary.<br />
No action necessary.<br />
Close the tray indicated so that printing can<br />
continue.<br />
INSTALL FUSER<br />
The f<strong>user</strong> is either not installed or not<br />
correctly installed in the printer.<br />
Press<br />
for help.<br />
For help press<br />
or<br />
134 Chapter 7 Problem solving <strong>ENWW</strong>