HP LaserJet 5200 user guide - ENWW
HP LaserJet 5200 user guide - ENWW
HP LaserJet 5200 user guide - ENWW
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Item Values Explanation<br />
FONT PITCH: Selects the font pitch. This item might not<br />
appear, depending on the font selected. The range is 0.44 to<br />
99.99.<br />
SYMBOL SET: Selects any one of several available symbol<br />
sets at the printer control panel. A symbol set is a unique<br />
grouping of all the characters in a font. PC-8 or PC-850 is<br />
recommended for line-draw characters.<br />
APPEND CR TO LF: Select YES to append a carriage return to<br />
each line feed that the printer encountered in backwardcompatible<br />
PCL jobs (pure text, no job control). Some<br />
environments, such as UNIX, indicate a new line using only the<br />
line feed control code. Use this option to append the required<br />
carriage return to each line feed.<br />
SUPPRESS BLANK PAGES: When generating your own PCL,<br />
extra form feeds are included that would cause one or more<br />
blank pages to be printed. Select YES for form feeds to be<br />
ignored if the page is blank.<br />
MEDIA SOURCE MAPPING: Allows you to select and maintain<br />
trays by number when you are not using the printer driver or<br />
when the software program has no option for tray selection.<br />
CLASSIC: Tray numbering is based on <strong>LaserJet</strong> 4 and older<br />
models. STANDARD: Tray numbering is based on newer<br />
<strong>LaserJet</strong> models.<br />
Print Quality submenu<br />
Some items on this menu are available in the program or printer driver (if the appropriate driver is<br />
installed). Program and printer-driver settings override control-panel settings. For more information,<br />
see Printer drivers. In general, it is best to change these settings in the printer driver, if applicable.<br />
Item Values Explanation<br />
SET REGISTRATION<br />
PRINT TEST PAGE<br />
SOURCE<br />
ADJUST TRAY [N]<br />
Shifts the margin alignment to center the image on the page<br />
from top to bottom, and left to right. You can also align the<br />
image that is printed on the front with the image that is<br />
printed on the back. Allows for one-sided and two-sided<br />
printing alignment.<br />
PRINT TEST PAGE: Prints a test page that shows the<br />
current registration settings.<br />
SOURCE: Selects the tray for which you want to print the<br />
test page.<br />
ADJUST TRAY [N]: Sets the registration for the specified<br />
tray, where [N] is the number of the tray. A selection<br />
<strong>ENWW</strong> Configure Device menu 31