Quickstart manual - ICPDAS-EUROPE

11.2.4 Installation for the Motion Module
Before the first time using the I-8094F / I-8092F / I-8094 modules, user has to
update ISaGRAF Driver to V.1.09 or latter version and then install the Drivers,
Libraries and the Utilities for the modules.
Step 1: Install the PAC CAB file
Run the “My Device” on the XPAC, switch to
“ \System_Disk\ISaGRAF ”, and then double click the PAC file to install
it.
I-8094(F) CAB file: i8094f_XP8KCE_20100208.CAB
I-8092F CAB file: i8092f_XP8KCE_20100208.CAB
Now, the Drivers and Libraries are installed into the XP-8xx7-CE6;The Utilities
are installed to the XP-8xx7-CE6, in the folder of “\System_Disk\i8094” .
The Utilities files:
Item Utility Name
1. MotionCfg
2. i8094_EzGo
Descriptions
A configuration utility to enable/disable the I-8094F/
8094/8092F modules on the XP-8xx7-CE6 series.
A tool, similar to the PISO-PS400 PCEzGo, helps to
indicate the status of each axis, configure the polarity
of external sensors and demonstrate the basic/simple
motion-controlling models.
3. EzFRnet Demonstrate the FRnet features.
Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS 11-5