Quickstart manual - ICPDAS-EUROPE

Please follow the similar steps to insert one another “Layer5” and one “Layer6”
with a “K2” symbol inside it, and also a “Layer7” with a “OK” symbol inside it as
below. We will use “K1” to display the state of the first input of the I-87055W
board, and “K2” for its second input.
Layer6
1. Click here to insert
“Layer5”.
2. Follow the similar steps
as former to insert
“Layer6” & “Layer7”
inside the “Layer5”.
Layer5
Layer7
Please follow the similar steps to insert “OUT01” & “OUT02” as below. The
OUT01 uses “./img/circle_blue0.jpg” as its image source, while OUT02 using
“./img/cmd0.jpg”. We will use OUT01 to display the state of the first output of
the I-87055W board, while “OUT02” is for controlling and displaying the
second output of the I-87055W.
Layer1
0
Layer9
Layer8
Layer1
1
Layer1
2
Layer13
4-30 Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS