Quickstart manual - ICPDAS-EUROPE

Now we have finished our Ladder code, click on “Save” and then click on “X” to
exit.
4.1.8 Connecting The I/O
We have defined variables name of “OUT01” , “OUT02” as “output” attribution,
while “K1” & “K2” as “input” attribution in step 4.1.4. These “input” & “output”
variables should be map to physical I/O in the controller before they can work.
To do that, click on “I/O connection” to get into the I/O connection window.
Double click on the first slot column (Please make sure your I-87055W I/O
board is plug in slot 1 of the XP-8xx7-CE6) & then check on the “Equipments”
& double click on the “I_87055: 8 CH. DI & 8 CH. DO ”. Click “OK”.
Click “Note” to
see more
description.
4-14 Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS