Quickstart manual - ICPDAS-EUROPE

4.4.4 Step 4 – Download Web HMI Pages To The Controller
The steps are similar as listed in Section 3.2. If you haven‟t practiced “Setting
Up A Web HMI Demo” listed in the Chapter 3, it‟s better to do it once to get
familiar with it.
First set the web options
Run “isaXPce6.exe” of XPAC. In “Web” page, check on “Enable Web HMI” and
then “Setting”. Please check on “Enable Account Security” and then click on
“Edit” to set (username , password). Then remember to click on “OK”.
Note: If “Enable Account Security” is not checked, any user can easily
get access to your XP-8xx7-CE6 through the Internet Explorer.
And then, please copy all files in this example1 to the controller
:\example1\ *.*
to the XP-8xx7-CE6‟s
\SystemDisk\Temp\HTTP\WebHMI\
Since the Web Pages are modified or new copied, please run “rs_wphmi.exe”
to reset the Web server. The “rs_wphmi.exe” must be run every time when
Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS 4-39