Quickstart manual - ICPDAS-EUROPE

More documents

Recommendations

Info

In the "ISaGRAF Debug Program" window, double click on the "LD1" where the cursor below is positioned. This will open up the ISaGRAF Quick LD Program window and you can see the LD program you have created. Click here to exit the simulator RUNNING THE SIMULATION PROGRAM When you double click on "LD1" in the "ISaGRAF Debug Programs" window, the follow window should appear. You can see outputs “OUT01” will blink in the period of 8 seconds. Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS 4-19
You can adjust the "T1" variable while the program is running. To accomplish this, click on the "Dictionary" icon which will open the "ISaGRAF Global Variables" window as shown in the first two pictures below. Click on “Timers” tab and then double click on “T1” to change the timer value to “T#4000ms” (this means 4000 ms). Then click on “Write”. Now we are going to simulate the “K1” & “K2” input. Click on “K1” using the left button of the mouse. To exit simulation, please close the “debugger” window. Close debugger will end simulation. 4-20 Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS
Page 1 and 2:
Getting Started : The XP-8xx7-CE6 P
Page 3 and 4:
2.1.1 The hardware protection devic
Page 5 and 6:
Z_PHA_SH: □ I-8094F ■ I-8092F
Page 7 and 8:
I/O Modules Selection Guide for XP-
Page 9 and 10:
I-8093W 3-axis Encoder Module, max.
Page 11 and 12:
I-87K GPS Modules I-87211W 0.1 ~ 99
Page 13 and 14:
Specifications: XP-8047-CE6/ 8347-C
Page 15 and 16:
Models XP-8047-CE6 XP-8347-CE6 XP-8
Page 17 and 18:
Models XP-8047-CE6 XP-8347-CE6 XP-8
Page 19 and 20:
1.2 Soft-GRAF HMI : Create A Colorf
Page 21 and 22:
1.4 Connect the Smart Power Meter P
Page 23 and 24: 1.7 Redundant System - Hot-Swap RS-
Page 25 and 26: 1.11 Modbus Slave: RTU/TCP • Modb
Page 27 and 28: 1.15 Data-Recorder & Data-Logger PC
Page 29 and 30: 1.19 Stress Monitoring Application
Page 31 and 32: 1.22 ZigBee Wireless Solution The X
Page 33 and 34: 1.24 Data Exchange: Fbus or Ebus
Page 35 and 36: 1.27 Database Application • Suppo
Page 37 and 38: Chapter 2 Software Installation And
Page 39 and 40: 2.1.1 The hardware protection devic
Page 41 and 42: 2.1.3 Important Notice For Window N
Page 43 and 44: 2. After clicking, it will show up
Page 45 and 46: 2.2 Step 2 - Installing The ICP DAS
Page 47 and 48: 2.4 Working eLogger HMI with ISaGRA
Page 49 and 50: • Multi-language: English, Tradit
Page 51 and 52: 3.2 Steps To Set Up A Web HMI Demo
Page 53 and 54: Restoring An ISaGRAF Project To res
Page 55 and 56: 3.2.4 Step 4 - Download Web Pages T
Page 57 and 58: Variables declaration: Name Type At
Page 59 and 60: You can then enter additional infor
Page 61 and 62: Quick way to declare There are two
Page 63 and 64: 4.1.5 Assign Modbus Network Address
Page 65 and 66: 1. Click on the "Create New Program
Page 67 and 68: Double click on anywhere inside the
Page 69 and 70: Now we have finished our Ladder cod
Page 71 and 72: By the same way, please connect “
Page 73: TIME TO COMPILE THE PROJECT! Now th
Page 77 and 78: When you click on the "Link Setup"
Page 79 and 80: Then click on "ISA86M: TIC Code For
Page 81 and 82: 4.4 Design The Web Page After finis
Page 83 and 84: Click inside this “Layer” and t
Page 85 and 86: Please follow the similar steps to
Page 87 and 88: 4.4.3 Step 3 - Adding Control Code
Page 89 and 90: OUT02 Area: Layer11 to Layer13 OU
Page 91 and 92: Now please go to the “head” are
Page 93 and 94: Now we have finished all the code.
Page 95 and 96: user has modified any file in the X
Page 97 and 98: Chapter 5 Web HMI Basics The XP-8xx
Page 99 and 100: Embed key whille submitting functio
Page 101 and 102: Below is the basic code for the men
Page 103 and 104: You may replace the main.htm in the
Page 105 and 106: Note: The long integer, timer and f
Page 107 and 108: 5.4.2.4 Displaying Dynamic String D
Page 109 and 110: … The layout (or location) of the
Page 111 and 112: 5.4.3.1 Post Boolean Value to The C
Page 113 and 114: A button to call ON_( ) First param
Page 115 and 116: 5.5 Multi-Pages The Web HMI in the
Page 117 and 118: 5.6 Web Security There are some way
Page 119 and 120: Chapter 6 VB.net 2008 Program Runni
Page 121 and 122: 2. Select the “mscorlib” in the
Page 123 and 124: 6.3 Compiling an Application Progra
Page 125 and 126:
Syntax: UserShare.UserGetCoil ( iUs
Page 127 and 128:
UserShare. UserGetReg_Short (ByVal
Page 129 and 130:
Chapter 8 InduSoft Project Running
Page 131 and 132:
Step 2: Create an InduSoft project.
Page 133 and 134:
This demo uses a DIO module I-87055
Page 135 and 136:
The main screen is as below. Create
Page 137 and 138:
Data Type Sample Syntax 0X 0X:1 Val
Page 139 and 140:
Download and run the project Select
Page 141 and 142:
Note: Users must install ISSymbol c
Page 143 and 144:
On-line help of ICP DAS add-on func
Page 145 and 146:
9.2 Installing The ISaGRAF Programm
Page 147 and 148:
Project Name Description I/O Boards
Page 149 and 150:
Project Name Description I/O Boards
Page 151 and 152:
Install the ISaGRAF example program
Page 153 and 154:
9.3 Frequently Asked Questions ISaG
Page 155 and 156:
No. English ISaGRAF Ver.3 FAQ Therm
Page 157 and 158:
No. English ISaGRAF Ver.3 FAQ 112 Q
Page 159 and 160:
Chapter 10 C# .net 2008 Program Run
Page 161 and 162:
2. Select the “mscorlib” in the
Page 163 and 164:
10.3 Compiling an Application Progr
Page 165 and 166:
■UserGetCoil Description: This fu
Page 167 and 168:
■UserGetReg_short ■UserGetReg_l
Page 169 and 170:
Chapter 11 Motion Control - Using I
Page 171 and 172:
Before continuing this chapter, ple
Page 173 and 174:
11.2.4 Installation for the Motion
Page 175 and 176:
11.2.5 Install the C function “Z_
Page 177 and 178:
Step 2: Select [ I/O complex equipm
Page 179 and 180:
Step 2. Click [ File ] > [ New ] or
Page 181 and 182:
Variable Name Type Attribute Networ
Page 183 and 184:
Turn on servo motor Turn off servo
Page 185 and 186:
If “Mov_PT” is “True”, star
Page 187 and 188:
The following program is running on
Page 189 and 190:
11.3.2 Set up I/O connection: Step
Page 191 and 192:
Step 2 : Compile & download: Click
Page 193 and 194:
X_DI, Y_DI, Z_DI, U_DI: Input chann
Page 195 and 196:
ENCO : Input Channel Ch1 : X-axis s
Page 197 and 198:
11.5 The Motion Control Programming
Page 199 and 200:
11.5.2 The I-8092F Example: The mot
Page 201 and 202:
If “Reset_ENCO” is “True”,
Page 203 and 204:
If “Step=1”, wait for 1 sec, th
Page 205 and 206:
11.6 ISaGRAF Function Descriptions
Page 207 and 208:
The expressions of I-8094F/I-8092F/
Page 209 and 210:
Z_HOME: ■ I-8094F □ I-8092F ■
Page 211 and 212:
Z_PHA_SH: □ I-8094F ■ I-8092F
Page 213 and 214:
Z_PT2: ■ I-8094F ■ I-8092F ■
Page 215 and 216:
Z_ARC2: ■ I-8094F ■ I-8092F ■
Page 217 and 218:
Z_DRV: ■ I-8094F ■ I-8092F ■
Page 219 and 220:
Z_GET_AC: ■ I-8094F ■ I-8092F
Page 221 and 222:
ZC_PT2: ■ I-8094F ■ I-8092F ■
Page 223 and 224:
ZC_ARC2: ■ I-8094F ■ I-8092F
Page 225 and 226:
Program M94_05 M94_06 M92_01 M92_01
Page 227 and 228:
11.8 How to Copy One Single Motion
Page 229 and 230:
Return Value Description -144 Canno
Page 231 and 232:
Appendix A Hardware System & Settin
Page 233 and 234:
A.3 Setting The IP Address For The
Page 235 and 236:
A.5 Pin Assignment of COM1~COM5 and
Page 237 and 238:
A.7 Deleting the ISaGRAF Project Fr
Page 239 and 240:
A.9 Linking To An HMI Interface Dev
Page 241 and 242:
Appendix B Upgrade XPAC’s ISaGRAF
Page 243 and 244:
3. Download the files from PC to XP
Page 245 and 246:
XP-8347-CE6 Getting Started : The X
Page 247 and 248:
Appendix D How to Enable/Disable XP
Page 249 and 250:
The COM port No. for the expansion
Page 251 and 252:
Getting Started : The XPAC-8xx7-CE6
Page 253 and 254:
Appendix F Slow Down ISaGRAF Driver
Page 255 and 256:
2. “Rtu_slav” is for setting th
Page 257 and 258:
Appendix I Using RS-232 Serial/USB
Page 259 and 260:
Then please follow the calibration
Page 261:
Reserved. Appendix K Enable the Scr
show all

Quickstart manual - ICPDAS-EUROPE

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?