Quickstart manual - ICPDAS-EUROPE

Program
M94_05
M94_06
M92_01
M92_01a
M92_01b
M92_01c
M92_01d
M92_02
M92_02a
M92_02b
M92_03
Description
Use I-8094 card and LD + ST language; 2-axis auto search
Home, and read max. 250 (x,y) operating parameters for
continuous motion from „\System_disk\Backup_integer_0.txt‟.
Use I-8094 card and LD + ST language;
2-axis auto search Home, and read more than 250 (x,y)
operating parameters for continuous motion from
„\System_disk\Backup_integer_0.txt‟.
Max. 10000 (x,y) operating parameters for this demo.
Use I-8092 card and LD language; Single-axis auto search
Near-Home & Home, and do the point-to-point moving.
The same as “M92_01”, but use ST language.
Use I-8092 card and LD language; Single-axis auto search
Home, and do the point-to-point moving.
Use I-8092 card and LD language; Single-axis auto search
Home, do the point-to-point moving, and the manual-pulsegenerator
control.
Use I-8092 card and LD language; Single-axis auto search
Home, do the point-to-point moving, and the FRnet.
Use I-8092 card and LD language; 2-axis auto search
Near-Home & Home, and do the 2-axis 2-dimension
interpolation moving.
The same as “M92_02”, but use ST language.
Use I-8094 card and LD language; 2-axis auto search Home,
and do the 2-axis 2-dimension interpolation moving.
Use I-8092 card and LD + ST language; 2-axis auto search
Home, do the 2-axis 2-dimension interpolation moving.
Getting Started : The XPAC-8xx7-CE6 PAC, Ver.1.23 , May 2012 by ICP DAS 11-57