Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power

More documents

Recommendations

Info

6-96 Marine/Industrial 4.3L Engine Timing Chain and Sprockets Clean and Inspect Caution: Refer to Safety Glasses Caution in Cautions and Notices. 1. Clean the components with cleaning solvent. 2. Dry the components with compressed air. 3. Inspect the camshaft timing chain for binding or wear. 480575 4. Inspect the camshaft sprocket and the crankshaft sprocket for the following: • Broken teeth (1) • Damaged teeth (2) • Chipped teeth (3) • Worn teeth • Uneven wear on the edge of the teeth • Worn valleys between the sprocket teeth • Crankshaft sprocket keyway for wear 188097 480551 Valve Rocker Arm and Push Rods Clean and Inspect Important: Parts that are to be reused must be marked, sorted and organized for assembly. 1. Mark, sort and organize the components for assembly. Caution: Refer to Safety Glasses Caution in Cautions and Notices. 2. Clean the components with cleaning solvent. 3. Dry the components with compressed air. 4. Inspect the valve rocker arm components for the following: • Valve rocker arm valve push rod socket contact surface (1). The contact surface must be smooth with no scoring or excessive wear. • Valve rocker arm roller pivot for binding or damage (2) • Valve rocker arm valve stem contact surface (3) • Valve rocker arm bolt threads for damage (4) 2000 Marine/Industrial
Engine Marine/Industrial 4.3L 6-97 5. Inspect the valve push rods for the following: • Restriction of the oil passage (1) • Wear or scoring of the end contact surfaces (2). The end contact surfaces must be smooth with no scoring or excessive wear. • Shaft for bends (3). Roll the valve pushrod on a flat surface to determine if the valve pushrod is bent. 6. Inspect the valve rocker arm support for excessive wear or damage. 488857 480553 2000 Marine/Industrial
Page 1 and 2:
Service Engine Engine Model: Genera
Page 3 and 4:
Table of Contents Caution Introduct
Page 5 and 6:
Table of Contents, continued Valve
Page 7 and 8:
Introduction This service manual pr
Page 9 and 10:
Cautions and Notices Definition of
Page 11 and 12:
Engine Marine/Industrial 4.3L 6-1 E
Page 13 and 14:
Engine Marine/Industrial 4.3L 6-3 F
Page 15 and 16:
Engine Marine/Industrial 4.3L 6-5 E
Page 17 and 18:
Engine Marine/Industrial 4.3L 6-7 G
Page 19 and 20:
Engine Marine/Industrial 4.3L 6-9 G
Page 21 and 22:
Engine Marine/Industrial 4.3L 6-11
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56: Engine Marine/Industrial 4.3L 6-45
Page 105: Engine Marine/Industrial 4.3L 6-95
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Notes
Page 195 and 196:
Notes
show all

Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power

Create successful ePaper yourself

Delete template?

Save as template?