Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Engine</strong> Marine/Industrial <strong>4.3L</strong> 6-87<br />
3. Inspect the engine flywheel (automatic transmission) (if<br />
equipped) for the following:<br />
• Stress cracks around the engine flywheel-to-torque<br />
converter bolt hole locations (1)<br />
• Missing balance weights<br />
• Stress cracks around the engine flywheel-to-crankshaft<br />
bolt hole locations (2) or (3)<br />
Important: Do not attempt to repair the welded areas (if present)<br />
that retain the ring gear to the engine flywheel plate. Always install<br />
a NEW engine flywheel.<br />
• Welded areas that retain the ring gear onto the engine<br />
flywheel for cracking (4) (if present)<br />
• Damaged ring gear teeth (5)<br />
4. Inspect the engine flywheel (manual transmission) (if<br />
equipped) for loose or improperly installed flywheel weights<br />
(if applicable).<br />
A properly installed flywheel weight should be installed until<br />
flush or below flush with the face of the engine flywheel.<br />
381965<br />
5. Inspect the engine flywheel (manual transmission) (if<br />
equipped) for the following:<br />
• Pitted friction surface (1)<br />
• Scoring or grooves (2)<br />
• Rust or other surface damage (3)<br />
• Damaged ring gear teeth (4)<br />
• Loose or improperly positioned ring gear<br />
The ring gear has an interference fit onto the engine<br />
flywheel and the ring gear should be positioned<br />
completely flat against the flange of the engine flywheel.<br />
64126<br />
188086<br />
2000 Marine/Industrial