Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6-76 Marine/Industrial <strong>4.3L</strong> <strong>Engine</strong><br />
3. Space the compression piston ring end gaps 120 degrees<br />
apart.<br />
4. Space the oil control piston ring end gaps a minimum of 90<br />
degrees apart.<br />
4967<br />
Crankshaft and Bearings Clean and Inspect<br />
Tools Required<br />
J 7872 Magnetic Base Dial Indicator<br />
J 36660 Electronic Torque Angle Meter<br />
Caution: Refer to Safety Glasses Caution in Cautions and<br />
Notices.<br />
Important: Use care when handling the crankshaft. Avoid damage<br />
to the crankshaft bearing surfaces.<br />
1. Clean the crankshaft in cleaning solvent. Remove all sludge<br />
or restrictions from the oil passages.<br />
2. Dry the crankshaft with compressed air.<br />
334383<br />
3. Clean the crankshaft bearings in cleaning solvent. Wipe the<br />
crankshaft bearings clean with a soft cloth, do not scratch<br />
the crankshaft bearing surface.<br />
4. Dry the crankshaft bearings with compressed air.<br />
2000 Marine/Industrial<br />
334386