Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6-156 Marine/Industrial <strong>4.3L</strong> <strong>Engine</strong><br />
6. Apply sealant GM P/N 12346004 or equivalent to the<br />
threads of the cylinder head bolts.<br />
Notice: Refer to Fastener Notice in Cautions and Notices.<br />
7. Install the cylinder head bolts finger tight.<br />
480537<br />
8. Tighten the cylinder head bolts in sequence on the first<br />
pass.<br />
Tighten<br />
Tighten the bolts in sequence on the first pass to 30 N•m<br />
(22 lb ft).<br />
9. Use the J 36660 in order to tighten the cylinder head bolts in<br />
sequence on the final pass.<br />
• Tighten the long bolts (1,4,5,8 and 9) on the final pass in<br />
sequence to 75 degrees.<br />
• Tighten the medium bolts (12 and 13) on the final pass in<br />
sequence to 65 degrees.<br />
• Tighten the short bolts (2,3,6,7,10 and 11) on the final<br />
pass in sequence to 55 degrees.<br />
5132<br />
10. Install the spark plug wire support and bolts.<br />
Tighten<br />
Tighten the spark plug wire support bolts to 12 N•m (106 lb<br />
in).<br />
11. Remove the front spark plug wire support bolt.<br />
The front spark plug wire support bolt is used to fasten the<br />
oil level indicator tube, and will be installed within the oil level<br />
indicator tube installation procedure.<br />
2000 Marine/Industrial<br />
328590