Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
Service Manual, General Motors 4.3L Engine (TP ... - Kohler Power
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6-106 Marine/Industrial <strong>4.3L</strong> <strong>Engine</strong><br />
480554<br />
Caution: Compressed valve springs have high tension<br />
against the valve spring compressor. Valve springs that are<br />
not properly compressed by or released from the valve spring<br />
compressor can be ejected from the valve spring compressor<br />
with intense force. Use care when compressing or releasing<br />
the valve spring with the valve spring compressor and when<br />
removing or installing the valve stem keys. Failing to use care<br />
may cause personal injury.<br />
Caution: Refer to Safety Glasses Caution in Cautions and<br />
Notices.<br />
9. Use the J 8062 in order to compress the valve springs.<br />
10. Install the valve stem keys.<br />
10.1 Use grease in order to hold the valve stem keys in<br />
place while disconnecting the J 8062.<br />
10.2. Look to ensure that the valve stem keys seat properly<br />
in the upper groove of the valve stem.<br />
10.3. Tap the end of the valve stem with a plastic-faced<br />
in order to seat the valve stem keys, if necessary.<br />
Oil Pump Disassemble<br />
1. Remove the oil pump driveshaft and oil pump driveshaft<br />
retainer.<br />
5274<br />
2000 Marine/Industrial
Change language