Hardware Manual - RTD Embedded Technologies, Inc.
Hardware Manual - RTD Embedded Technologies, Inc.
Hardware Manual - RTD Embedded Technologies, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Features<br />
The DM6425HR is a 12-bit, 500 kHz analog I/O dataModule with either 16 differential or 32 single-ended analog<br />
input channels, 4 analog output channels, and 4 independent 8-bit digital I/O ports.<br />
Ultra-compact for embedded and portable applications, the DM6425HR complete feature set includes:<br />
• Analog threshold triggering on any one channel<br />
• 16 differential or 32 single-ended analog input channels<br />
• 12-bit, 2 μs analog-to-digital converter with 500 kHz throughput<br />
• Programmable input ranges: ± 5, ± 10, or 0 to +10 V<br />
• Programmable gains of 1, 2, 4, and 8<br />
• 1024 x 24 channel-gain scan memory with skip bit<br />
• Software, pacer clock, and external trigger modes<br />
• Scan, burst, and multi-burst using the channel-gain table<br />
• 16-bit programmable high-speed sample counter<br />
• A/D DMA transfer<br />
• 1024 sample A/D buffer for gap-free, high-speed sampling under Windows and DOS<br />
• Pre-, post-, and about-trigger modes<br />
• 3-bit analog input data/trigger marker<br />
• two 8-bit programmable digital I/O lines with Advanced Digital Interrupt modes<br />
• 1024 sample digital input buffer for gap-free, high-speed sampling under Windows and DOS<br />
• two byte programmable digital I/O lines<br />
• Six 16-bit timer/counters (two available to user) and onboard 8 MHz clock<br />
• Four 12-bit D/A output channels<br />
• ± 5, 0 to +5, ±10, or 0 to +10 V analog output range<br />
• Programmable interrupt source<br />
• +5 V operation<br />
• Windows and Linux® example programs<br />
• DOS example programs with source code<br />
• Diagnostics software<br />
BDM-610010034 Rev C Chapter 1: Introduction 5