warning!

More documents

Recommendations

Info

HOW TO USE THE CARTON BOX (GD-ROM DRIVE) STOP IMPORTANT! When you want to order for replacing or repairing service of the GD-ROM drive that is used by the product, pack it in a carton box as instructed below, and then deliver the carton box to a service agent. If you do not observe the instruction, your order may not be accepted or may be charged additionally. If you handle the GD-ROM drive differently from the following instructions, its components may be damaged. • Contain the GD-ROM drive in a dedicated carton box. Do not disassemble it or remove any part from it unless otherwise instructed. • Before containing the GD-ROM drive in a dedicated carton box, attach the GD-ROM drive lid (DISC LID) onto the drive and fix the lid with a screw. • Before containing the GD-ROM drive in a dedicated carton box, remove the GD-ROM disk from the drive. Do not attempt to move the GD-ROM drive with a GD-ROM disk inside. • Before containing the GD-ROM drive in a dedicated carton box, remove the GD-ROM drive bracket. Carefully keep the GD-ROM drive bracket and the 4 set screws, because they will be reused. • When inserting the GD-ROM drive into a dedicated carton box, be careful about an inserting direction as illustrated below. • The packing materials in a carton box are used as a cushion. Use them always when inserting the GD-ROM drive into a dedicated carton box. Do not bend them. Remove the GD drive bracket. FIG. 5 b www.seuservice.com 12
6. ASSEMBLING AND INSTALLATION WARNING! Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage. Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard. Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a fire risk. This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation. Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difficult. To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where step-like grade differences, a ditch, or slope exist. CAUTION! Handle molded parts with care. Undue weight or pressure may cause them to break and the broken pieces may cause injury. To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents. Make sure that the GD cable connector is inserted parallel to the plug. Improper insertion may cause damage to the connector and present a fire When carrying out the assembling and installation, follow the following 6-item sequence. 1 2 3 4 5 6 INSTALLING THE POP AND THE POP CARD SECURING IN PLACE(ADJUSTER ADJUSTMENT) INSTALLING THE GD-ROM DRIVE(SETTING GD-ROM DISC) POWER SUPPLY, AND EARTH CONNECTION TURNING POWER ON ASSEMBLING CHECK 13 www.seuservice.com
Page 1 and 2: www.seuservice.com 2ND PRINTING OCT
Page 3 and 4: BEFORE USING THE PRODUCT, BE SURE T
Page 5 and 6: TABLE OF CONTENTS BEFORE USING THE
Page 7 and 8: DEFINITION OF LOCATION MAINTENANCE
Page 9 and 10: 1. HANDLING PRECAUTIONS When instal
Page 11 and 12: 2. PRECAUTIONS CONCERNING INSTALLAT
Page 13 and 14: 3. OPERATION PRECAUTIONS TO BE HEED
Page 15 and 16: WARNING! To avoid electric shock a
Page 17 and 18: 4. NAME OF PARTS FIG. 4 a OVERVIEW
Page 19: The following Table 5b lists the pa
Page 23 and 24: Attach the POP to the POP Holder. S
Page 25 and 26: FIG. 6. 2 e Provide ventilation spa
Page 27 and 28: Remove the 1 truss head screw that
Page 29 and 30: Connect the GD cable connector (for
Page 31 and 32: 4 POWER SUPPLY, AND EARTH CONNECTIO
Page 33 and 34: Network Check Screen Each Check Scr
Page 35 and 36: (2)SOUND TEST SOUND TEST RIGHT SPEA
Page 37 and 38: 7. CARD READER/WRITER 7-1 SETTING D
Page 39 and 40: 7-2 HEAD CLEANING STOP IMPORTANT!
Page 41 and 42: 8. PRECAUTIONS WHEN MOVING THE MACH
Page 43 and 44: 9. GAME DESCRIPTION The following e
Page 45 and 46: Game Flow Insert Card Screen: Inse
Page 47 and 48: Course and rival character selectio
Page 49 and 50: Time Attack Game Content & Rules T
Page 51 and 52: 10. EXPLANATION OF TEST AND DATA DI
Page 53 and 54: 10-2 SYSTEM TEST MODE STOP IMPORTAN
Page 55 and 56: B. INPUT TEST Select INPUT TEST to
Page 57 and 58: D. FORCE FEEDBACK CAUTION! If you s
Page 59 and 60: ACCEL: Make adjustments to ACCEL Pr
Page 61 and 62: G. CARD R/W TEST STOP IMPORTANT! Cl
Page 63 and 64: CLEANING PROCESS Cleaning refers to
Page 65 and 66: WEEK: Set a different store close t
Page 67 and 68: Press the TEST Button to move to sc
Page 69 and 70: J. BACKUP DATA CLEAR Delete all BOO
Page 71 and 72:
11-1 REMOVING THE CONTROL PANEL Poo
Page 73 and 74:
REPLACEMENT PROCEDURE This procedur
Page 75 and 76:
12. SHIFT LEVER In the Test Mode, i
Page 77 and 78:
Loosen the screw which secure the P
Page 79 and 80:
COIN DOOR 71 www.seuservice.com
Page 81 and 82:
For the purpose of static preventio
Page 83 and 84:
16. REPLACING THE FLUORESCENT LAMP/
Page 85 and 86:
Remove the Button Plate. The Button
Page 87 and 88:
CLEANING THE CABINET SURFACES When
Page 89 and 90:
TABLE 18. 1 a ERROR DISPLAY CAUSE C
Page 91 and 92:
18-2 TROUBLESHOOTING (WHEN NO ERROR
Page 93 and 94:
TABLE 18. 2 PROBLEM CAUSE COUNTERME
Page 95 and 96:
19. GAME BOARD WARNING! In order t
Page 97 and 98:
19-2 REMOVING THE GAME BOARD Follo
Page 99 and 100:
20. COMMUNICATION PLAY 20-1 SETTING
Page 101 and 102:
22. PARTS LIST 1 2 12 3 5 4 8 6 11
Page 103 and 104:
Assy Pop ITEM NO. PART NO. DESCRIPT
Page 105 and 106:
ASSY SPEAKER R (APC-1565) ITEM NO.
Page 107 and 108:
ASSY CONTROL PANEL (TOF-2000) Attac
Page 109 and 110:
ASSY HANDLE MECHA (TOF-2500) Plated
Page 111 and 112:
ASSY ACCEL&BRAKE (SPG-2200) 103 www
Page 113 and 114:
ASSY BASE BOX (TOF-1520) 9 10 * Not
Page 115 and 116:
ASSY SEAT 6 107 www.seuservice.com
Page 117 and 118:
ASSY MAIN BD (TOF-4500) 101 3 ITEM
Page 119 and 120:
ASSY ELEC BD ITEM NO. PART NO. DESC
Page 121 and 122:
23. WIRE COLOR CODE TABLE THE WIRE
Page 123:
Warranty Your new Sega Product is c
show all

warning!

Create successful ePaper yourself

Delete template?

Save as template?