warning!
warning!
warning!
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11-2 ADJUSTING/REPLACING THE VOLUME<br />
ADJUSTMENT PROCEDURE<br />
Loosen the 2 screws that secure the VR Bracket and move the VR Bracket to adjust the angle and<br />
condition of the gear alignment.<br />
Keeping the handle straight, align the gears so that the direction of the D Cut side of the Volume<br />
Shaft matches that shown in the diagram.<br />
Tighten the 2 screws and secure the VR Base.<br />
FIG. 11. 2 a<br />
After making adjustments, use the Volume Setting Screen to set the Volume (refer to 10-3E).<br />
The recommended value for the handle Volume is "80H" when the handle is set straight.<br />
Verify that the value decreases when the handle is rotated to the left and increases when rotated<br />
to the right. Use the Test Mode to view the Volume value (refer to 10-3B).<br />
www.seuservice.com<br />
64
Change language