warning!

More documents

Recommendations

Info

11-2 ADJUSTING/REPLACING THE VOLUME ADJUSTMENT PROCEDURE Loosen the 2 screws that secure the VR Bracket and move the VR Bracket to adjust the angle and condition of the gear alignment. Keeping the handle straight, align the gears so that the direction of the D Cut side of the Volume Shaft matches that shown in the diagram. Tighten the 2 screws and secure the VR Base. FIG. 11. 2 a After making adjustments, use the Volume Setting Screen to set the Volume (refer to 10-3E). The recommended value for the handle Volume is "80H" when the handle is set straight. Verify that the value decreases when the handle is rotated to the left and increases when rotated to the right. Use the Test Mode to view the Volume value (refer to 10-3B). www.seuservice.com 64
REPLACEMENT PROCEDURE This procedure requires the following tools: Philips screwdriver for the M4 screws, 2 mm hexagonal wrench, 11—12mm monkey wrench, nipper, cutter, wire stripper, soldering iron and industrial dryer. Remove the connectors. Remove the 2 screws securing the VR Bracket and remove the entire Bracket and Volume. VR BRACKET CONNECTOR (1) RED 3P SCREW (2) M4×10, w/flat & spring washers PHOTO 11. 2 Loosen the 2 hexagon socket screws on the Gear Holder and remove the Gear Holder. Remove the nut securing the VR Bracket, then separate the Volume from the VR Bracket and replace it. FIG. 11. 2 b 65 www.seuservice.com
Page 1 and 2:
www.seuservice.com 2ND PRINTING OCT
Page 3 and 4:
BEFORE USING THE PRODUCT, BE SURE T
Page 5 and 6:
TABLE OF CONTENTS BEFORE USING THE
Page 7 and 8:
DEFINITION OF LOCATION MAINTENANCE
Page 9 and 10:
1. HANDLING PRECAUTIONS When instal
Page 11 and 12:
2. PRECAUTIONS CONCERNING INSTALLAT
Page 13 and 14:
3. OPERATION PRECAUTIONS TO BE HEED
Page 15 and 16:
WARNING! To avoid electric shock a
Page 17 and 18:
4. NAME OF PARTS FIG. 4 a OVERVIEW
Page 19 and 20:
The following Table 5b lists the pa
Page 21 and 22: 6. ASSEMBLING AND INSTALLATION WARN
Page 23 and 24: Attach the POP to the POP Holder. S
Page 25 and 26: FIG. 6. 2 e Provide ventilation spa
Page 27 and 28: Remove the 1 truss head screw that
Page 29 and 30: Connect the GD cable connector (for
Page 31 and 32: 4 POWER SUPPLY, AND EARTH CONNECTIO
Page 33 and 34: Network Check Screen Each Check Scr
Page 35 and 36: (2)SOUND TEST SOUND TEST RIGHT SPEA
Page 37 and 38: 7. CARD READER/WRITER 7-1 SETTING D
Page 39 and 40: 7-2 HEAD CLEANING STOP IMPORTANT!
Page 41 and 42: 8. PRECAUTIONS WHEN MOVING THE MACH
Page 43 and 44: 9. GAME DESCRIPTION The following e
Page 45 and 46: Game Flow Insert Card Screen: Inse
Page 47 and 48: Course and rival character selectio
Page 49 and 50: Time Attack Game Content & Rules T
Page 51 and 52: 10. EXPLANATION OF TEST AND DATA DI
Page 53 and 54: 10-2 SYSTEM TEST MODE STOP IMPORTAN
Page 55 and 56: B. INPUT TEST Select INPUT TEST to
Page 57 and 58: D. FORCE FEEDBACK CAUTION! If you s
Page 59 and 60: ACCEL: Make adjustments to ACCEL Pr
Page 61 and 62: G. CARD R/W TEST STOP IMPORTANT! Cl
Page 63 and 64: CLEANING PROCESS Cleaning refers to
Page 65 and 66: WEEK: Set a different store close t
Page 67 and 68: Press the TEST Button to move to sc
Page 69 and 70: J. BACKUP DATA CLEAR Delete all BOO
Page 71: 11-1 REMOVING THE CONTROL PANEL Poo
Page 75 and 76: 12. SHIFT LEVER In the Test Mode, i
Page 77 and 78: Loosen the screw which secure the P
Page 79 and 80: COIN DOOR 71 www.seuservice.com
Page 81 and 82: For the purpose of static preventio
Page 83 and 84: 16. REPLACING THE FLUORESCENT LAMP/
Page 85 and 86: Remove the Button Plate. The Button
Page 87 and 88: CLEANING THE CABINET SURFACES When
Page 89 and 90: TABLE 18. 1 a ERROR DISPLAY CAUSE C
Page 91 and 92: 18-2 TROUBLESHOOTING (WHEN NO ERROR
Page 93 and 94: TABLE 18. 2 PROBLEM CAUSE COUNTERME
Page 95 and 96: 19. GAME BOARD WARNING! In order t
Page 97 and 98: 19-2 REMOVING THE GAME BOARD Follo
Page 99 and 100: 20. COMMUNICATION PLAY 20-1 SETTING
Page 101 and 102: 22. PARTS LIST 1 2 12 3 5 4 8 6 11
Page 103 and 104: Assy Pop ITEM NO. PART NO. DESCRIPT
Page 105 and 106: ASSY SPEAKER R (APC-1565) ITEM NO.
Page 107 and 108: ASSY CONTROL PANEL (TOF-2000) Attac
Page 109 and 110: ASSY HANDLE MECHA (TOF-2500) Plated
Page 111 and 112: ASSY ACCEL&BRAKE (SPG-2200) 103 www
Page 113 and 114: ASSY BASE BOX (TOF-1520) 9 10 * Not
Page 115 and 116: ASSY SEAT 6 107 www.seuservice.com
Page 117 and 118: ASSY MAIN BD (TOF-4500) 101 3 ITEM
Page 119 and 120: ASSY ELEC BD ITEM NO. PART NO. DESC
Page 121 and 122: 23. WIRE COLOR CODE TABLE THE WIRE
Page 123:
Warranty Your new Sega Product is c
show all

warning!

Create successful ePaper yourself

Delete template?

Save as template?