warning!

More documents

Recommendations

Info

19-3 COMPOSITION OF GAME BOARD ASSY CASE NAT TOF USA (840-0108D-01) :USA TRUSS SCREW (1),chrome M3×85 TRUSS SCREW (3),chrome M3×50 ASSY CASE NAO COMMUNICATION BD 840-0001E DIP SW DIMM BD NAT TOF ENG 840-0108B ASSY CASE NAT MAIN W/232C USA; 840-0046A-11 FIG. 19. 3 a DIP SW SETTING In this product, set all the DIP SW to OFF. FIG. 19. 3 b www.seuservice.com 90
20. COMMUNICATION PLAY 20-1 SETTING FOR COMMUNICATION PLAY Change the game setting for each seat in a manner so as to meet communication play. If the setting is not correct, communication play cannot be played. SETTING FOR COMMUNICATION PLAY Turn the linked machines' power on. Cause all of the machines to enter the test mode. (10-3.) Select the GAME ASSIGNMENTS. Perform the SEAT NUMBER setting in the GAME ASSIGNMENTS screen. Set one of the machines to "1" and the other to "2". GAME TEST MODE GAME ASSIGNMENTS GAME DIFFICULTY NORMAL DEFALT VIEW DRIVER SEAT NUMBER 1 CARD R/W ON -> EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG. 20. 3 Cause all of the machines to exit from the test mode. After the test mode, the screens proceed to and display the Network Check. When network checking is finished, the system displays Advertise Screen. This indicates successful completion of setting. If SEAT NUMBER setting is wrong, Network Check Screen appears, but it does not change to Advertise Screen. Normally the Network Check takes several 10 seconds. If the screen does not proceed from the Network Check screen, some sorts of errors such as incorrect setting, incorrect connection or malfunctioning of the communication cable can be considered. 20-2 NETWORK PLAY PRECAUTIONS In network play, difficulty level and other settings are made from Seat Number 1. Changing the settings at Seat Number 1 also changes the settings for Seat Number 2. Settings for Seat Number 2 cannot be changed from Seat Number 2 and so will not appear in the list of settings. Should a network connection fail during network play, gameplay will be suspended and the Network Check Screen will be displayed. If one of the units attached for network play enters Test Mode, the other unit will display the Network Check Screen. Even when units are connected for network play, each seat, each game may be given different cost settings. Incorrect cost settings may cause budget balancing problems. The operation of a unit when connected to another for network play is different than that of a stand-alone unit. Administration of network units should be handled carefully. Entering Test Mode will cause any other machines set up for network play to display the Network Check Screen. When customers are playing the game, do not enter Test Mode on any network play-enabled machine. 91 www.seuservice.com
Page 1 and 2:
www.seuservice.com 2ND PRINTING OCT
Page 3 and 4:
BEFORE USING THE PRODUCT, BE SURE T
Page 5 and 6:
TABLE OF CONTENTS BEFORE USING THE
Page 7 and 8:
DEFINITION OF LOCATION MAINTENANCE
Page 9 and 10:
1. HANDLING PRECAUTIONS When instal
Page 11 and 12:
2. PRECAUTIONS CONCERNING INSTALLAT
Page 13 and 14:
3. OPERATION PRECAUTIONS TO BE HEED
Page 15 and 16:
WARNING! To avoid electric shock a
Page 17 and 18:
4. NAME OF PARTS FIG. 4 a OVERVIEW
Page 19 and 20:
The following Table 5b lists the pa
Page 21 and 22:
6. ASSEMBLING AND INSTALLATION WARN
Page 23 and 24:
Attach the POP to the POP Holder. S
Page 25 and 26:
FIG. 6. 2 e Provide ventilation spa
Page 27 and 28:
Remove the 1 truss head screw that
Page 29 and 30:
Connect the GD cable connector (for
Page 31 and 32:
4 POWER SUPPLY, AND EARTH CONNECTIO
Page 33 and 34:
Network Check Screen Each Check Scr
Page 35 and 36:
(2)SOUND TEST SOUND TEST RIGHT SPEA
Page 37 and 38:
7. CARD READER/WRITER 7-1 SETTING D
Page 39 and 40:
7-2 HEAD CLEANING STOP IMPORTANT!
Page 41 and 42:
8. PRECAUTIONS WHEN MOVING THE MACH
Page 43 and 44:
9. GAME DESCRIPTION The following e
Page 45 and 46:
Game Flow Insert Card Screen: Inse
Page 47 and 48: Course and rival character selectio
Page 49 and 50: Time Attack Game Content & Rules T
Page 51 and 52: 10. EXPLANATION OF TEST AND DATA DI
Page 53 and 54: 10-2 SYSTEM TEST MODE STOP IMPORTAN
Page 55 and 56: B. INPUT TEST Select INPUT TEST to
Page 57 and 58: D. FORCE FEEDBACK CAUTION! If you s
Page 59 and 60: ACCEL: Make adjustments to ACCEL Pr
Page 61 and 62: G. CARD R/W TEST STOP IMPORTANT! Cl
Page 63 and 64: CLEANING PROCESS Cleaning refers to
Page 65 and 66: WEEK: Set a different store close t
Page 67 and 68: Press the TEST Button to move to sc
Page 69 and 70: J. BACKUP DATA CLEAR Delete all BOO
Page 71 and 72: 11-1 REMOVING THE CONTROL PANEL Poo
Page 73 and 74: REPLACEMENT PROCEDURE This procedur
Page 75 and 76: 12. SHIFT LEVER In the Test Mode, i
Page 77 and 78: Loosen the screw which secure the P
Page 79 and 80: COIN DOOR 71 www.seuservice.com
Page 81 and 82: For the purpose of static preventio
Page 83 and 84: 16. REPLACING THE FLUORESCENT LAMP/
Page 85 and 86: Remove the Button Plate. The Button
Page 87 and 88: CLEANING THE CABINET SURFACES When
Page 89 and 90: TABLE 18. 1 a ERROR DISPLAY CAUSE C
Page 91 and 92: 18-2 TROUBLESHOOTING (WHEN NO ERROR
Page 93 and 94: TABLE 18. 2 PROBLEM CAUSE COUNTERME
Page 95 and 96: 19. GAME BOARD WARNING! In order t
Page 97: 19-2 REMOVING THE GAME BOARD Follo
Page 101 and 102: 22. PARTS LIST 1 2 12 3 5 4 8 6 11
Page 103 and 104: Assy Pop ITEM NO. PART NO. DESCRIPT
Page 105 and 106: ASSY SPEAKER R (APC-1565) ITEM NO.
Page 107 and 108: ASSY CONTROL PANEL (TOF-2000) Attac
Page 109 and 110: ASSY HANDLE MECHA (TOF-2500) Plated
Page 111 and 112: ASSY ACCEL&BRAKE (SPG-2200) 103 www
Page 113 and 114: ASSY BASE BOX (TOF-1520) 9 10 * Not
Page 115 and 116: ASSY SEAT 6 107 www.seuservice.com
Page 117 and 118: ASSY MAIN BD (TOF-4500) 101 3 ITEM
Page 119 and 120: ASSY ELEC BD ITEM NO. PART NO. DESC
Page 121 and 122: 23. WIRE COLOR CODE TABLE THE WIRE
Page 123: Warranty Your new Sega Product is c
show all

warning!

Create successful ePaper yourself

Delete template?

Save as template?