warning!
warning!
warning!
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CLEANING THE CABINET SURFACES<br />
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or<br />
diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do<br />
not use such solvents as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching<br />
agent and chemical dustcloth.<br />
SEAT (Greasing to Seat Rail Portion)<br />
Move the Seat to the rearmost position and apply<br />
spray greasing to the portion shown at the right<br />
once every 3 months by using NOK KLUBER L60<br />
or GREASE MATE SEGA PART No. 090-0066.<br />
After greasing, move the Seat a few times forward<br />
and backward so as to allow the grease to be<br />
applied all over uniformly. Be sure to wipe grease<br />
which attaches to the surfaces of the PROTECT<br />
RUBBER on the Seat Rail, or any excess grease.<br />
FIG. 17<br />
79 www.seuservice.com