SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial <strong>Application</strong>s<br />
PROTECTING BOATS AT MOORAGES<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
You can extend coverage of a marine alarm to the moorage.<br />
Use a Sentrol 2105A standard-type Magnapull to extend coverage of a normal<br />
marine alarm to the dock or moorage where the boat is secured. The magnet block<br />
may be attached in several locations on the dock depending on the structure of the<br />
moorage. It may be possible to mount it in a location where it will not be visible.<br />
An extra magnet housing will be required if the boat owner wants to arm the<br />
system at a location different from the usual moorage.<br />
For example, it is often possible to run the switch cord through a permanently<br />
attached fixture on the dock, such as a cleat or ring, then back to the boat where<br />
the magnet housing is attached.<br />
Note: Leads of various lengths are available from the factory.<br />
2105A<br />
Plan 1: Attach magnet block inside<br />
the boat<br />
Plan 2: Attach magnet block to dock<br />
MAGNETIC CONTACTS<br />
3.48
Change language