SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
.........................................................................................................................................................................<br />
Residential & Commercial <strong>Application</strong>s<br />
PROTECTING SLIDING ALUMINUM WINDOWS<br />
APPLICATION 3<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
Combined Recessed and Surface Installation<br />
Remove window from frame (see instructions in “Installation with Removal of<br />
Window”— <strong>Application</strong> 1, page 93).<br />
A 1075 or 1075W switch with a 1927 magnet is ideal for this application. The<br />
magnet can be quickly installed using double-sided tape instead of RTV mounting<br />
compound, which takes 15 minutes to set up.<br />
Locate desired mounting position for switch perpendicular to magnet as shown in<br />
Figure 4.<br />
Drill hole in window frame and run wires. Insert switch into frame.<br />
Mount magnet on inside of upper window channel using the double-sided tape<br />
provided. The Sentrol logo must read left to right. The “S” in Sentrol should be<br />
aligned with the centerline of the switch.<br />
Reinsert window in frame.<br />
Check continuity with window in closed position.<br />
1075W with 1927 magnet<br />
Perpendicular<br />
Recessed Mount<br />
Switch<br />
<strong>SENTROL</strong><br />
Recessed<br />
Surface Magnet<br />
MAGNETIC CONTACTS<br />
Figure 4. Combined Recessed and Surface Installation<br />
3.23