SENTROL Application notes - Alarms BC

.........................................................................................................................................................................
Residential & Commercial Applications
APPLICATION
INSTALLATION
RECOMMENDED
PRODUCTS
PROTECTING WOOD/STEEL DOORS
WITH ROLLER PLUNGER CONTACTS
Wood and steel doors can be protected with roller plunger contacts that can be
installed without removing the door from its hinges. The versatile Sentrol 3005
and 3008 Roller Plunger Contacts can also be used on windows and sliding patio
doors. Roller plungers are more versatile than plunger switches, which work in
limited applications. The 3008 is designed specifically for fight, thin-framed
window and door applications.
Roller plunger switches can also be used to protect high-value objects such as
antiques, rare books, or works of art by placing the object on the recessed contact.
Note: In order to comply with UL installations, the contact should not be used on
exterior doors that open outward.
The roller plunger contact must be mounted on the hinge side of the door or
window to be protected.
Open the door or window. Drill a 3/4" (1.9 cm) diameter hole in frame. Hole
should be 1.5" (3.81 cm) deep for the 3005 and 3/4" (1.9 cm) deep for the 3008.
Run wire through the frame and connect switch to the alarm loop. Insert switch in
hole and test for proper operation by opening door or window.
Screw switch in place.
3005, 3008
0.75"
1.905 cm
Flange thickness 0.05"
1.50"
3.81 cm
1.75"
4.45 cm
Models 3005, 3006, 3007
Models 3005, 3006, 3007
1.188"
3.02 cm
1.50"
3.81 cm
Side View
0.800"
2.03 cm
0.25" (635 cm)
0.750"
1.905 cm
0.75"
1.905 cm
0.050"
0.127 cm
Models 3002, 3003, 3004
Models 3002, 3003, 3004 Model 3008
0.90"
2.29 cm
FRONT VIEW
1.20"
3.05 cm
1.60"
4.07 cm
MAGNETIC CONTACTS
3.17