SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Commercial <strong>Application</strong>s<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
PROTECTING TRUCKS AND TRAILERS<br />
AT LOADING DOCKS<br />
Trucks and trailers can be secured with Sentrol’s MagnaPull at loading docks.<br />
Extend a Sentrol 2105A or 2115A standard Magnapull unit from the perimeter<br />
loop on each loading dock. There are two different mount methods.<br />
Method 1: A magnet block can be affixed to the trailer so that when the trailer is<br />
in the loading dock, the switch cord can be plugged in. In this case, an extra<br />
magnet block will be needed on the dock for storing the switch cord when the<br />
loading dock is vacant.<br />
Method 2: Run the switch cord through a permanently attached part on the trailer<br />
and then back to the dock and the magnet block.<br />
2105A, 2115A<br />
Method 1<br />
Magnapull Switch<br />
Method 2<br />
MAGNETIC CONTACTS<br />
3.72
Change language