SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
.........................................................................................................................................................................<br />
Commercial <strong>Application</strong>s<br />
PROTECTING OVERHEAD OR CURTAIN DOORS<br />
APPLICATION 7<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
Switch Mounted on “Stop”<br />
Installing security switch on “stop” near top of overhead curtain type door.<br />
Close door. Tape magnet in place with masking tape. Position magnet in recessed<br />
portion of slat adjacent to door stop. Mount with red end as shown.<br />
Roll up door, making sure magnet clears and does not interfere with operation of<br />
door. Close door.<br />
Attach magnet to door with clamps, or with RTV mounting compound.<br />
Attach wires to switch terminals. Attach switch to inside of long portion of bracket.<br />
Label must be right side up and facing toward door when bracket is mounted on<br />
stop.<br />
Attach bracket to stop with self-tapping screws.<br />
Test proper operation of switch by closing and opening door.<br />
Dress wire leads with wire clamps and hook into alarm loop. Retest for operation<br />
and clearance.<br />
Switch — 1042TW; Magnet — 1923; Bracket — 1910-2; Clamps — 1931, RTV-1905.<br />
1923 Magnet<br />
1042T-W<br />
Switch<br />
1931 Clamps<br />
1910-2<br />
Bracket<br />
Red End<br />
MAGNETIC CONTACTS<br />
Door Stop<br />
3.59
Change language