SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial <strong>Application</strong>s<br />
PROTECTING OTHER FENCE GATES<br />
APPLICATION Other chain link fence gates can be protected with magnetic contacts. Brackets<br />
attach to gate post and gate frame, depending on diameter of post and gate. Switch<br />
or magnet may be mounted on inside, outside or side of bracket, depending on<br />
space between post and gate.<br />
INSTALLATION Determine switch and magnet position. Switch has 3' armored cable. Cable may be<br />
run to junction box or to inside of pipe for splicing.<br />
Mount brackets on post and gate with masking tape. Swing gate to check<br />
clearance. Drill 9/64" (0.36 cm) diameter holes to mount brackets, using selftapping<br />
screws.<br />
Mount switch and magnet to brackets — labels should read in same direction for<br />
proper polarity.<br />
Test switch with ohmmeter.<br />
Wire switch into circuit and test.<br />
Note: To prevent false alarms, keep gate fastened tight using a chain or other<br />
restraining device.<br />
Important: Switch cable of various lengths can be ordered from factory.<br />
RECOMMENDED 1094A Kit<br />
PRODUCTS Magnet Switch<br />
Magnet<br />
Brackets<br />
Magnet<br />
MAGNETIC CONTACTS<br />
Gate<br />
Fence<br />
Post<br />
Gate<br />
Fence<br />
Post<br />
Switch<br />
Switch<br />
Gate<br />
Fence<br />
Post<br />
Gate<br />
Fence<br />
Post<br />
Magnet<br />
Magnet<br />
Switch<br />
3.50
Change language