SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
SENTROL Application notes - Alarms BC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial <strong>Application</strong>s<br />
USING A PIR TO ACTIVATE OUTDOOR LIGHTING<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
A PIR can be used to activate lighting controls around homes, detached garages,<br />
gardens, back yard patios and decks, outdoor parking lots, auto dealerships,<br />
shopping areas, shipping areas, garden shops, aircraft hangers, perimeters of<br />
military installations, and public utility installations.<br />
Mount the PIR approximately 7 ft. (2.13m) high on a flat surface to discourage<br />
rodents or birds from perching.<br />
Make sure conduit openings and mounting holes are well sealed. If conduit is<br />
used, run the conduit out the side or bottom of the unit to keep condensation from<br />
the conduit from draining into the PIR’s housing.<br />
Avoid direct sunlight on the plastic lens.<br />
Keep away from branches that may impede PIR’s coverage pattern.<br />
6187CTX Outdoor PIR<br />
SPACE DETECTION<br />
The 6187CTX comes in a cast aluminum gasket-sealed<br />
housing that is water resistant and operates to -40°C.<br />
PIR<br />
Relay<br />
&<br />
Power Supply<br />
To Lights<br />
120 VAC<br />
When activating lights use a separate relay and power supply.<br />
2.43
Change language