Getting Started SURFCAM
Getting Started SURFCAM
Getting Started SURFCAM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 3: Add the cover<br />
Next you will create the cover with a Cross Section surface. For this type of surface you need at<br />
least two profiles in the major (primary) direction and at least two profiles in the minor (secondary)<br />
direction to form a grid. The more profiles you use, the more accurate the surface.<br />
1 Click Cross Section<br />
2<br />
First click Manual and<br />
then click Grid<br />
You are prompted to select cross-section elements in the major direction. You will select the three<br />
elements that form the longest shape of the cover. You will use the Single command to select the<br />
elements one by one.<br />
3<br />
Click Single and then select the three<br />
elements shown<br />
4<br />
Click Done to confirm the selection of<br />
major elements<br />
112 | Get <strong>Started</strong> with <strong>SURFCAM</strong>