Getting Started SURFCAM
Getting Started SURFCAM
Getting Started SURFCAM
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step 4: Chamfer the edges<br />
Chamfering is useful for removing burrs, trimming sharp edges, or adding a relief angle. For this<br />
project, you will add a 0.075-inch 45° chamfer around the top edge of the outer part profile using a<br />
0.25-inch chamfer tool.<br />
1<br />
On the NC menu, click 2 Axis and<br />
then click Chamfer Mill<br />
2<br />
Create a chain on the part profile and then<br />
click Done<br />
88 | Get <strong>Started</strong> with <strong>SURFCAM</strong>