MPED-X-Routing-Tender20080721 - Madhya Pradesh State Excise
MPED-X-Routing-Tender20080721 - Madhya Pradesh State Excise
MPED-X-Routing-Tender20080721 - Madhya Pradesh State Excise
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4. Testing and Acceptance The Vendor must build up an overall<br />
plan for testing and acceptance of<br />
system, in which specific methods<br />
and steps should be clearly indicated<br />
and approved by <strong>MPED</strong>. The<br />
acceptance test plan will be defined by<br />
the Bidder, agreed and approved by<br />
<strong>MPED</strong> and include all the necessary<br />
steps to ensure complete functionality,<br />
operation and performance of the<br />
system.<br />
1. All levels of testing will be conducted<br />
at the installation sites.<br />
2. Testing must demonstrate that the<br />
new systems satisfy the operational and<br />
technical performance criteria.<br />
3. It is Vendor’s responsibility during the<br />
tests to evaluate and recommend any<br />
further changes to the infrastructure.<br />
Any recommendations for change will be<br />
discussed with <strong>MPED</strong>.<br />
4.Testing Methodology/Techniques<br />
The Vendor must outline the<br />
methodology that will be used for<br />
testing.<br />
5. The Vendor must define the various<br />
levels or types of testing that will be<br />
performed.<br />
6. The Vendor must provide necessary<br />
checklist/documentation that will be<br />
required for testing.<br />
7. The Vendor must describe how the<br />
testing methodologies will conform to<br />
requirements.<br />
8. The Vendor must indicate how one<br />
will demonstrate to <strong>MPED</strong> that all<br />
functions in the new system installed<br />
have been tested.<br />
Operational Acceptance Tests<br />
1. <strong>MPED</strong> (with the assistance of the<br />
Supplier) may perform the following<br />
tests on the System and its Subsystems<br />
following Installation to determine<br />
whether the System and the<br />
Subsystems meet all the requirements<br />
mandated for Operational Acceptance.<br />
15