Driver Installation Guide - Egmont Instruments

Operation Mode Box
The Operation Mode box allows you to set a Multi-Card
system as either a Master/Slave or Multiple/Independent
system. All boards in a Master/Slave system operate with a
common clock and trigger (Master/Slave Mode is an optional
upgrade). Each board in a Multiple/Independent system has
its own clock and trigger source. Simply click on the radio
button next to the appropriate option.
While GageConfig fully supports a Multiple Independent
system of CompuScope cards, the current versions of
GageScope ® software have no such support.
Verifying Driver Instalation / Gage Config107