Driver Installation Guide - Egmont Instruments
Driver Installation Guide - Egmont Instruments
Driver Installation Guide - Egmont Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Note: If you previously had an ISA CompuScope card installed<br />
in the same computer, the configuration information stored in<br />
a file called gagescop.inc may point to I/O and memory<br />
addresses for that ISA bus card; for example, I/O address at<br />
0x200 and memory address at 0x0000.<br />
Note: For CP500-class boards, the I/O Address and Memory<br />
Base fields both display PnP (for Plug-n-Play) or PCI PnP (for<br />
PCI Plug-n-Play), depending on your version of Gage Config.<br />
Gage Config has queried the BIOS as to the addresses for<br />
your board(s) and displays this code to indicate that these<br />
fields cannot be modified by the user.<br />
For CSx012/PCI boards, the Memory Base field displays PnP<br />
(for Plug-n-Play) or PCI PnP (for PCI Plug-n-Play), depending<br />
on your version of Gage Config. Gage Config has queried the<br />
BIOS as to the addresses for your board(s) and displays this<br />
code to indicate that this field cannot be modified by the user.<br />
80<br />
<strong>Driver</strong> <strong>Installation</strong> <strong>Guide</strong> for CompuScope Cards