Manual - Gefen
Manual - Gefen
Manual - Gefen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started<br />
Installation<br />
Connecting the 8x8 Crosspoint Matrix for HDMI<br />
1. Connect up to eight Hi-Def sources to the HDMI inputs (see page 4) on the 8x8<br />
Crosspoint Matrix for HDMI using HDMI cables.<br />
2. Connect up to eight HDTV displays to the HDMI outputs (see page 4) on the 8x8<br />
Crosspoint Matrix for HDMI.<br />
3. Connect the included 24V DC power supply to the power receptacle on the Matrix.<br />
4. To control the matrix using an RS-232 device, connect a DB-9 cable between the<br />
RS-232 controller and the RS-232 port on the matrix. See RS-232 and IP Configuration<br />
for more information on RS-232 settings.<br />
5. To control the matrix using Telnet, UDP, or the built-in Web interface, connect an<br />
Ethernet cable from the RJ-45 jack on the matrix to the computer or LAN.<br />
See IP / UDP Configuration for more information on using IP control.<br />
6. Connect the AC power cord to the power supply and connect the power cord to an<br />
available electrical outlet.<br />
Sample Wiring Diagram<br />
CAT-5 CABLE<br />
HDMI CABLE<br />
RS-232 CABLE<br />
8x<br />
Hi-Def Sources<br />
IR Extender<br />
Network<br />
IP Control<br />
Matrix<br />
RS-232 Controller<br />
8x<br />
HD Displays<br />
EXT-HDFST-848CPN<br />
WARNING: The power supply should always be connected to a<br />
grounded electrical AC outlet.<br />
page | 7
Change language