Manual - Gefen
Manual - Gefen
Manual - Gefen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced Operation<br />
RS-232 / IP Commands<br />
#show_fw<br />
The #show_fw command displays the current version of firmware. Also see the<br />
#show_ver_data command.<br />
Syntax:<br />
#show_fw<br />
Parameters:<br />
None<br />
Example:<br />
#show_fw<br />
FIRMWARE VERSION = EXT-HDFST-848CPN v3.1G<br />
#show_hpd<br />
The #show_hpd command displays the HPD (Hot-Plug Detect) status of the specified<br />
output. If a display (sink) is not connected or if the sink is not powered, then Low will be<br />
returned. Otherwise, High is returned.<br />
Syntax:<br />
#show_hpd param1<br />
Parameters:<br />
param1 Output [A ... H]<br />
Example:<br />
#show_hpd c<br />
HPD OF OUTPUT C(OUTPUT3) IS LOW<br />
#show_hpd d<br />
HPD OF OUTPUT D(Dell_30) IS HIGH<br />
page | 55