Manual - Gefen
Manual - Gefen
Manual - Gefen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating the 8x8 Crosspoint Matrix for HDMI<br />
Front Panel Controls<br />
Front Panel LCD Screen<br />
The front-panel of the 8x8 Crosspoint Matrix for HDMI contains a 16-character 2-line LCD<br />
display which is used to provide feedback when performing routing functions. In addition,<br />
this display is used to show the current routing status of the matrix.<br />
OUT:ABCDEFGH<br />
IN:12345678<br />
OUT:ABCDEFGH<br />
IN :12345678<br />
Besides displaying routing information and other feedback during various operations,<br />
the matrix provides setting information (shown below), from the routing status screen.<br />
To display other matrix settings, consecutively press the Menu button.<br />
LCD Screen<br />
IN:12345678<br />
MODE:FFFFFFFF<br />
Description<br />
FST mode screen. Displays the current FST<br />
switching mode (Fast or Slow) of each input.<br />
See Fast Switching Technology for information<br />
on using FST.<br />
1.IP ADDRESS<br />
192.168.1.249<br />
IP address screen. DIsplays the current<br />
IP address of the matrix. See IP / UDP<br />
Configuration for more information on using<br />
IP control.<br />
OUT:ABCDEFGH<br />
IN:12345678<br />
Routing status screen. Displays the current<br />
routing status of the matrix. This is the default<br />
screen. See Routing Basics for information on<br />
routing sources.<br />
page | 11
Change language