Manual - Gefen
Manual - Gefen
Manual - Gefen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Operation<br />
RS-232 / IP Commands<br />
Status<br />
Command<br />
#help<br />
#show_fw<br />
#show_hpd<br />
#show_rsense<br />
m<br />
n<br />
Description<br />
Displays the list of available commands<br />
Displays the current version of firmware<br />
Displays the HPD status of the specified output<br />
Displays the RSENSE status of the specified output<br />
Displays the current routing status of the matrix<br />
Displays the routing state for the specified output<br />
#help<br />
The #help command displays the list of available RS-232 / IP commands. The #help<br />
command can also be used to provide help on a specific command.<br />
Syntax:<br />
#help [param1]<br />
Parameters:<br />
param1<br />
Command (optional)<br />
Notes:<br />
When asking for help on a specific command, the “#” character must be included as part of<br />
the command.<br />
Example:<br />
#help r<br />
R PARAM1 PARAM 2...PARAM 9<br />
ROUTING COMMAND<br />
PARAM 1 = 1 - 8 (INPUT)<br />
PARAM 2 = 0 (ALL OUTPUTS)<br />
PARAM 2...PARAM 9 = A - H (OUTPUTS)<br />
page | 54