Manual - Gefen
Manual - Gefen
Manual - Gefen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced Operation<br />
RS-232 / IP Commands<br />
Masking<br />
Command<br />
#echo<br />
#fadefault<br />
#hdcp<br />
#hpd_pulse<br />
#lock_edid<br />
#mask<br />
#power<br />
#reboot<br />
#set_edid<br />
#set_ir<br />
#show_hdcp<br />
#show_ir<br />
#show_mask<br />
#show_out_colordpt<br />
#show_out_res<br />
#unmask<br />
Description<br />
Enables / disables RS-232 echo<br />
Resets matrix to factory-default routing and masking<br />
Disables / enabled HDCP detection on the specified<br />
output<br />
Cycles with HPD line on the specified output<br />
Locks the local EDID during a power-cycle event<br />
Masks the specified output(s)<br />
Toggles the power state of the matrix<br />
Reboots the matrix<br />
Copies EDID data between inputs, outputs, and banks<br />
Sets the IR channel of the matrix<br />
Displays the HDCP status of the specified output<br />
Displays the current IR channel of the matrix<br />
Displays the mask status of the specified output<br />
Displays the current color depth of the output signal<br />
Displays the maximum output resolution of a display<br />
Unmasks the specified output(s)<br />
page | 62
Change language