Manual - Gefen
Manual - Gefen
Manual - Gefen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced Operation<br />
RS-232 / IP Commands<br />
#set_udp_remote_ip<br />
The #set_udp_remote_ip command sets the remote UDP IP address. The IP address<br />
must be specified using dot-decimal notation. The default UDP remote IP address is<br />
192.168.1.255. Use the #show_udp_remote_ip command to display the current<br />
UDP remote IP address.<br />
Syntax:<br />
#set_udp_remote_ip param1<br />
Parameters:<br />
param1<br />
IP address<br />
Example:<br />
#set_udp_remote_ip 192.168.1.227<br />
REMOTE UDP IP ADDRESS 192.168.1.227 IS SET.<br />
#set_udp_remote_port<br />
The #set_udp_remote_port command sets the remote UDP listening port. The default<br />
UDP remote port is 50008. Use the #show_udp_remote_port to display the current<br />
remote UDP listening port.<br />
Syntax:<br />
#set_udp_remote_port param1<br />
Parameters:<br />
param1 Port [1 ... 65535]<br />
Example:<br />
#set_udp_remote_port 5500<br />
REMOTE UDP COMMUNICATION PORT 5500 IS SET.<br />
page | 43