Manual - Gefen
Manual - Gefen
Manual - Gefen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Operation<br />
RS-232 / IP Commands<br />
#set_http_port<br />
The #set_http_port command specifies the Web server listening port. The matrix must<br />
be rebooted after executing this command. The default port setting is 80. The current<br />
HTTP listening port can be displayed using the #show_http_port command.<br />
Syntax:<br />
#set_http_port param1<br />
Parameters:<br />
param1 Port [1 ... 1024]<br />
Example:<br />
#set_http_port 82<br />
HTTP Communication Port 82 Is Set. Please Reboot The Unit.<br />
#set_telnet_pass<br />
The #set_telnet_pass command sets the Telnet password. The password cannot<br />
exceed 20 characters in length. The matrix must be rebooted after executing this<br />
command. The default password is Admin.<br />
Syntax:<br />
#set_telnet_pass param1<br />
Parameters:<br />
param1<br />
Password<br />
Example:<br />
#set_telnet_pass reindeer<br />
TELNET Interface Password Is Set.<br />
page | 33
Change language