Manual - Gefen
Manual - Gefen
Manual - Gefen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Operation<br />
RS-232 / IP Commands<br />
#set_output_name<br />
The #set_output_name command names the specified output. The name of the output<br />
cannot exceed 20 characters in length Spaces are not permitted when naming outputs. If<br />
a space is required, then use the underscore (“_”) character.<br />
Syntax:<br />
#set_output_name param1 param2<br />
Parameters:<br />
param1 Output [A ... H]<br />
param2<br />
Name<br />
Example:<br />
#set_output_name d Dell_30<br />
Dell_30 NAME IS ASSIGNED TO OUTPUT D<br />
#set_preset_name<br />
The #set_preset_name command names the specified preset. The name of the preset<br />
cannot exceed 20 characters in length Spaces are not permitted when naming presets.<br />
If a space is required, then use the underscore (“_”) character.<br />
Syntax:<br />
#set_preset_name param1 param2<br />
Parameters:<br />
param1 Preset [1 ... 8]<br />
param2<br />
Name<br />
Example:<br />
#set_preset_name 2 Studio51<br />
Studio51 NAME IS ASSIGNED TO PRESET 2<br />
page | 49
Change language