Manual - Gefen
Manual - Gefen
Manual - Gefen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Operation<br />
RS-232 / IP Commands<br />
UDP Configuration<br />
Command<br />
#set_udp_port<br />
#set_udp_remote_ip<br />
#set_udp_remote_port<br />
#show_udp_port<br />
#show_udp_remote_ip<br />
#show_udp_remote_port<br />
#use_udp_enable<br />
Description<br />
Sets the local UDP port<br />
Sets the remote UDP IP address<br />
Sets the remote UDP port<br />
Displays the local UDP server listening port<br />
Displays the remote UDP IP address<br />
Displays the remote UDP port<br />
Enables / disabled UDP access<br />
#set_udp_port<br />
The #set_udp_port command sets the local UDP server listening port. The default port<br />
setting is 21. Use the #show_udp_port to display the current UDP port setting.<br />
Syntax:<br />
#set_udp_port param1<br />
Parameters:<br />
param1 Port [1 ... 65535]<br />
Example:<br />
#set_udp_port 1024<br />
UDP COMMUNICATION PORT 1024 IS SET<br />
page | 42