Op Amps for Everyone - The Repeater Builder's Technical ...

packages, 17-24 to 17-27
parallel signal traces, 17-19
passive component characteristics, 17-11 to
17-21
resistors, 17-11
surface mount, 17-27
through-hole considerations, 17-26 to 17-29
trace antennas, 17-14 to 17-17
trace characteristics, 17-14
trace reflections, 17-16 to 17-21
PCB layout, 17-10
loop and slot antenna, 17-15
trace corners, 17-16
PCB mechanical conduction, 17-3 to 17-8
double sided, 17-5
layers, 17-4 to 17-7
materials, 17-3 to 17-5
multi-layer, 17-6
single layer, 17-4 to 17-6
PCB traces
broadcasting from, 17-9
trace to plane capacitance, 17-17
Percent overshoot, graph, 7-4
Phase margin, 11-19 to 11-22
graph, 7-4
graph for TLV277x, 7-7
Phase shift
buffered oscillator circuit, 15-16
graph, 11-21
graph for TL07x, 7-5
graph for TL08x, 7-6
oscillator, 15-3 to 15-5
Phase shift oscillator
buffered, 15-15 to 15-17
circuit, 15-14
single amplifier, 15-14 to 15-16
Photodiode amplifier, 12-8
Phototransistor amplifier, 12-9
Photovoltaic cell amplifier, 12-9
Pin outs, op amp, 17-24
Pink noise, 10-11
Plane, to trace capacitance, 17-17
Plane placement, digital and analog, 17-8
Power booster, DAC, 14-22
Power supply rejection ratio, DAC, 14-14
Precision
current feedback amp, 9-2 to 9-4
voltage feedback amp, 9-2 to 9-4
Precision current source, 12-7
Pulse response, graph for TLV277x, 7-7
Q
Quadrature oscillator, 15-18 to 15-21
circuit, 15-19
Quality factor, filter, 16-9 to 16-11
R
R/2R
circuit for DAC, 14-5
DAC, 14-4 to 14-6
resistor array, 14-4
Rail-to-rail op amp, input circuit, 18-8
Rail-to-rail output op amp, output stage circuit, 18-11
RC
first-order passive low pass circuit, 16-2
fourth-order pass low pass circuit, 16-3
low pass filter frequency graph, 16-4
low pass phase response graph, 16-4
RC , phase shift graph, 15-3
Reconstruction filter
characteristics, 13-14
circuit for single pole, 13-15
DAC, 13-13 to 13-16
Red noise, 10-12
Reference bias circuit, 12-13
Reference circuit
ADC, 13-15 to 13-18
DAC, 13-15 to 13-18
Reference voltage characterization, 12-12 to 12-14
Resistance, flux residue, 17-20
Resistor
current feedback amp, 8-9 to 8-12
high-performance circuit, 17-11
Resistor ladder
circuit for DAC, 14-2
DAC, 14-2 to 14-4
Resistive transducer, 12-6, 12-7
Resonance, capacitor, 17-22
Ringing predictions, 5-15 to 5-17
RMS noise, vs P-P noise, 10-1 to 10-3
Rule
current divider, 2-4
voltage divider, 2-3
Index-11