Olympus E-300 Advanced Manual

5
Focusing functions
AF frame selection
Normally, the camera measures the distance to the subject using the 3 AF frames
in the viewfinder and selects the most appropriate point. This function allows you
to select only one AF frame.
Center AF frame
(AUTO) : Focuses using the 3 AF
frames. (Factory default
setting)
: Focuses using the left AF
frame.
: Focuses using the center AF
frame.
: Focuses using the right AF
Viewfinder
frame. Left AF frame Right AF frame
Available modes
78
P A S M
1 Press the (AF frame selection)
button.
● The current setting is displayed on the
monitor.
2 Rotate the control dial until the
desired setting is displayed.
3 Take the picture.
● The AF frame you have selected lights up.
Monitor
Control dial
AUTO
MENU
button
When the control panel screen is off