User Guide Product(range) - Neopost

More documents

Recommendations

Info

Pos: 101 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11_x_Ü2_Additional information texts in main display_Table_Top_printers @ 2\mod_1271235880723_912.doc @ 14712 @ 2 6. Starting the printer for the first time after the update • If you were updating from a firmware version < 4.7 then perform the steps below. If not continue with step “7. Checking the firmware version”. • Press and hold the Home key and turn on the printer. This will perform a default reset. • Keeping holding the Home key until the printer shows Printer Name Default Reset • Use the Setting Dump, printed at the beginning of this process, to set the previous mechanical alignment values. 7. Checking the firmware version • Check the now installed firmware version in the printer menu: SERVICE > CONFIGURAT. INFO > Firmware: • Now the firmware update is completed. IMPORTANT! If an error message appears during the update process, just turn the printer off and on. Check if you are sending a compatible Flashware file. Try to resend the file. 148 User Manual Version 3.1
Pos: 102 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11.x_Ü2_Ink package ID number @ 2\mod_1269249230092_912.doc @ 13727 @ 2 Pos: 103 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11.x_Ü3_Ink package ID number 6030206 @ 3\mod_1298296700989_912.doc @ 30527 @ 31 11.9 Additional display texts Under certain circumstances, additional information texts may be shown in the main display. In the table below you find descriptions for the different information texts. Information in main display Test WaitEOT NoData! PapRUN NoPaper EmerMode Description The printer is running test prints. A pause command was sent to the printer. It will only continue with the print job, when the Ok key is pressed. The data for a page was not sent completely to the printer. The printer is running a paper run test. Data but no paper. E.g. the feeder is empty. The printer is in emergency mode, because the internal model identification is damaged. In this unlikely event the printer will only work with a reduced performance to prevent the printer from any damage. Please contact your Neopost branch or dealer. 11.10 Ink package ID number The id number of the loaded ink package clearly indicates the settings and ink parameters currently used in your printer. With this ink package id number changes and updates can easily be tracked. 11.10.1 ID: 6030206 The following settings and parameters are used with this id number: Ink type d BLACK DYE v VERSATILE BLAC Note Limitation on shuttle-head printers (AS-700 and AS- 710) only: The maximum carriage speed is limited to 0.526 mm/s / 103.5 ft./min. This ensures a constantly high print quality and increases the life time of the ink cartridge. m MAX GLOSSY f FAST DRY BLACK i IQ INK User Manual Version 3.1 149
Page 1 and 2:
as-930 aDDress PrInTer User ManUal
Page 3 and 4:
Pos: 3 /[Allgemeines]/0.0a_Note_Tra
Page 5 and 6:
6 Printer menu (firmware V4.8).....
Page 7 and 8:
Table of Figures Figure 1:AS-930 Ov
Page 9 and 10:
Pos: 8 /Bedienungsanleitungen/Gerä
Page 11 and 12:
Pos: 13 /Bedienungsanleitungen/Ger
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
2: Ink costs and ink range This lin
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
fixing screws lift those separation
Page 31 and 32:
Page 33 and 34:
wing screw print area Figure 14: Po
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
JOB PARAMETERS.....................
Page 41 and 42:
Pos: 60.3 /Bedienungsanleitungen/Ge
Page 43 and 44:
Page 45 and 46:
MAIN MENU The Home key opens the ma
Page 47 and 48:
KEEP ALIVE Here you can turn on the
Page 49 and 50:
Pos: 60.23 /Bedienungsanleitungen/G
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
LED/Beeper Here you can check if al
Page 69 and 70:
Page 71 and 72:
Pos: 60.109 /Bedienungsanleitungen/
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
2. Connect the PC to the printer
Page 83 and 84:
Page 85 and 86:
Correct IP address syntax Don’t e
Page 87 and 88:
7.4.3 Using a fixed IP address 1. P
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98: Pos: 72 /Bedienungsanleitungen/Ger
Page 103 and 104: Pos: 78.4 /Bedienungsanleitungen/Ge
Page 107 and 108: Pos: 78.18 /Bedienungsanleitungen/G
Page 125 and 126: Pos: 85 /Serviceanleitungen/Geräte
Page 127 and 128: Pos: 90 /Zubehör/Generelles Zubeh
Page 137 and 138: 11.4 How to test the Ethernet conne
Page 139 and 140: 11.5 Network connection between the
Page 143 and 144: 11.7 How to create a print file Dep
Page 145 and 146: Pos: 100 /Serviceanleitungen/Gerät
Page 147: 4 • Enable “Send to printer”
Page 153 and 154: 12 Glossary Term Addressing ASCll B
Page 155 and 156: Font inclination Font type HP TIJ 2
Page 157 and 158: Printer Driver Printhead Printhead
Page 159 and 160: 13 Index Accessories ..............
Page 161: 9204019U-B edition 08/04/2011 - 920
show all

User Guide Product(range) - Neopost

Create successful ePaper yourself

Delete template?

Save as template?