User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 51 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-830/5.4_Ü2_Adjusting Printer to the material thickness_AS-830/930 @ 2\mod_1268645618968_912.doc @ 13413 @ 2<br />
Figure 12: Position of the slide<br />
5.4 How to adjust the printer to the material thickness<br />
To ensure a sharp and clean print quality and a safe material transport, you have to adjust<br />
the distance from the print unit to the material.<br />
• Open the wing screw (see Figure 13).<br />
• Turn the thickness adjustment screw to the appropriate value.<br />
For material up to 0.3 mm thickness you can use the lowest position.<br />
• Tighten the wing screw again.<br />
<strong>User</strong> Manual Version 3.1 31
Change language